我看字典>英语词典>isothermal change翻译和用法

isothermal change

英 [ˌaɪsəʊˈθɜːməl tʃeɪndʒ]

美 [ˌaɪsəˈθɜrməl tʃeɪndʒ]

等温变化

化学

双语例句

  • PROFESSOR BAWENDI: So, for an ideal gas, the isothermal is the easy one because the energy doesn't change.
    对理想气体,等温过程最简单,因为能量不变。
  • Isothermal Superplasticity and Microstructural Change in LM_2 Steel
    LM2钢恒温超塑性及其显微组织的变化
  • Under the experimental condition of loading in isothermal process, the microwave radiation energy of solid matters like concrete varied with the change of pressure.
    在等温过程加载条件下,得出混凝土等固体物质的微波幅射能量随压力变化的实验结果。
  • The curve steep degree of isothermal absorption within formation pressure change extent determines the gas production. The Qi ( vital energy)
    相渗曲线越陡,残余气饱和度越小对气产出越有利;等温吸附线在地层压力变化范围内的缓陡程度决定气产量的高低。
  • Therefore, if it's isothermal, the energy of the ideal gas doesn't change.
    理想气体的,能量不变。
  • Under the loading condition of isothermal process, the experimental result shows that the infrared radiation energy of concrete is varied markedly with the change of pressure. This change is caused completely by pressure, and independent of temperature with no intermediate physical process of heat generating.
    在等温过程加载条件下,实验得到混凝土的红外辐射能量随压力变化而显著变化的结果,这个变化与温度无关,完全由压力引起,不需要经历生热中间物理过程。
  • When bonding temperature and time was not changed and the process of isothermal solidification was carried completely, interface structure, reaction layer thickness and isothermal solidification thickness were changed with the change of Ti foil thickness.
    PTLP连接时,当连接温度和时间不变,且连接时间能保证等温凝固过程充分进行的条件下,Si3N4/Ti/Cu/Ti/Si3N4连接界面结构、反应层厚度、等温凝固层厚度随着Ti箔厚度改变而改变。
  • Based upon the theory of phase transformation and the theory of local softening mode, a rule of the change in isothermal internal friction can be interpreted through the change of the nucleation rate within the incubation period.
    等温内耗的变化规律可根据相变理论和局部软化理论,通过孕育期内形核率J~的变化作出解释。
  • Confined Isothermal Crystallizing Kinetics and Melting Behavior of Polyethylene Glycol ( PEG)/ Poly ( vinyl alcohol) ( PVA) Solid-Solid Phase Change Materials
    聚乙二醇/聚乙烯醇固-固相变材料等温结晶动力学及熔融行为研究
  • Under controlling the displacement speed, we observed temperature along with time change near the defect zone so as to obtain the isothermal about temperature along with time change and study the energy aerodynamic in the defect& evolution process.
    在控制位移速度的拉伸条件下,观测含缺陷材料缺陷附近温度随时间的变化,进一步得到缺陷附近温度场的等温线随时间的演变,依此研究缺陷演化过程中的能量耗散。